TP.VST59S.PB801

Board Model/Number: TP.VST59S.PB801

Board Type: 3-in-1 LED TV Main Board (Main Board + Power Supply + LED Driver)

Chipset: MStar TSUMV59 Series

Operating System: Non-Android (Factory Firmware)

CPU: MStar TSUMV59 Embedded Processor

GPU: Integrated Graphics Engine

RAM: 512MB DDR3 (Some variants 1GB)

ROM: 4MB / 8MB / 16MB / 32MB SPI Flash (Depending on Firmware Version)

Panel Interface: Single / Dual LVDS

Supported Resolution: Up to 1920 × 1080 (Full HD)

Supported Panel Size: 32" to 42" LED TV (Some versions support up to 46")

Video System: PAL / SECAM / NTSC

TV Tuner: Analog TV

Backlight Output: 30V to 120V DC (Constant Current LED Driver)

Backlight Power: Up to 45W

Audio Amplifier: 2 × 8W (8Ω)

HDMI: HDMI 1.3 / 1.4 (HDCP 1.2)

USB: USB 2.0 (Media Playback & Software Upgrade)

VGA Input: Supported

AV Input: Supported

Component (YPbPr): Supported

Headphone Output: Supported

Power Supply Input: AC 100V–240V, 50/60Hz

Standby Power: Less than 0.5W

Service Menu Code: MENU + 1147

Firmware Upgrade: USB Flash Drive

OSD Languages: English, Chinese, French, German, Italian, Spanish, Portuguese (Varies by Firmware)

NOTE: Given Firmware is USB upgradeable. Multy Power Electronics is not responsible for any type of Loss or Damage in result with uploading the firmware.

Installation Method:

Step 1: Take a USB FAT32 with LED flash Light  built-in. While doing software that LED Flash light will give indicate of installing the software.

Step 2: Put USB into Computer/Laptop.

Step 3: First Make sure that USB is empty if not then Format it.

Step 4: Copy software which one required for the screen resolution and send it to the USB.

Step 5: After sending the software to USB, eject the USB from computer/Laptop.

Step 6: Before installing the software on android Board, make sure your TV is not plugged in into electricity.

Step 7: Insert the USB into TV, before plug in into electricity press and Hold the Power button.

Step8: Turn the power switch ON from plug while press and Hold the power button,

Tv Display will be ON and Software Process will be start, after software will be done then Plug off the TV.

Step 9: Remove the USB then Turn ON the TV.

Tv will be ON and ready for use.

DOWNLOAD HERE:

TP.VST59S.PB801 1920x1080